Canon G2010 printer is the latest variant of Canon yaang manufacturer using the factory-born infusion system. To date, the Canon G2010 Resetter Software is not yet present and the way Canon G2010 Reset must replace Eprom IC or Eeprom or IC Counter.
Condition:
• New item
• Ic code: T16
• Programmed already
• Guaranteed 100% working well on Canon G2010 printer
• Already tested on Canon G2010 printer
Canon G2010 Eprom or Eprom IC function include:
• For resetting canon G2010 printer
• Coping with error code
”ATTENTION”:
Installation way Eprom Mainboard Canon G2010 Printer is different from other versions
Here we expose how to install the correct Canon G2010 Printer IC Eprom IC:
- Make sure the Eprom IC Code you're going to installl it fits the original one (which is indicated on your Canon G2010 Printer mainboard). The code must be the same.
- Use regular solder or blower and prepare flux to make installation easier and secure.
- Install the Eprom IC on the printer, make sure the array of all IC feet is connected to the PCB (you can note and adjust by referring to the original IC built in the printer). If the direction and installation are not fitting then the installation process will fail and the IC will not work, as well as appear the indication of Eprom IC Error or even shuts down.
- The next step turns on the printer, then the indication light will flash / continuous blinking. Note the monitor screen (printer driver on computer) status ”Processing”
- Press and hold the stop button for more than 7 Seconds. If the green light indicator still flashes then press it again and hold it for 7 Seconds again, until the printer responds / there is movement.
- Make sure you follow the above step exactly the same as exactly the same